User Manual

ASR-2000 Series User Manual

Switch the Display Modes

The ASR-2000 power supply has three display modes. The

standard display mode shows the power supply setup in the

middle and the 3 configurable measurements on the right that

correspond to the far-left live-time measurements section. The

simple display mode shows all measurement items available on the

ASR-2000 with 3 measurement formats switchable at any time. The

harmonic display mode shows both harmonic voltage and

harmonic current relevant measurements for user.

Steps

1. Press the Display key.

2. The display mode will toggle each

time when the key is pressed

besides locked mode.

Standard Mode

Measurement Setting

Configurable

measurements

Hold

measurement

Configuring the

Standard Mode

Measurements

1. Press the F1(ITEM1), F2(ITEM2)

or F3(ITEM3) soft-key to enter

each menu.

2. Use the scroll wheel to select a measurement

item and press Enter to confirm. Refer to page

89 for more details of measurement parameters.