User Manual

ASR-2000 Series User Manual
82
Setting the Output On Phase
Background
The on phase setting sets the starting phase of
the voltage output.
Steps
1. Press Shift + Menu to make the
ON Phs parameter selectable.
+
Also, it is available to use the
scroll wheel followed by the Enter
key to make the ON Phs
parameter selectable as well.
2. Set the ON Phs setting with the scroll wheel or
with the F3 (MAX) and F4 (MIN) soft-keys to set
the On Phase to the maximum and minimum
values, respectively.
AC+DC-INT, AC-INT, AC+DC-ADD,
AC-ADD, AC+DC-Sync, AC-Sync
ON
Phs
Range
0.0° ~ 359.9°
Soft-keys
FIXED/FREE, MAX, MIN
3. Press Enter to confirm the On Phase setting.