User Manual

ASR-2000 Series User Manual
52
3. Remove the frame of air inlet followed by
gently putting it aside.
4. The air filter is
positioned in the rear
side of frame of air inlet.
Simply rinse it or replace
the filter with a new one
based on the actual
status.
5. Repeat the previous steps conversely to
reinstall the air inlet with new filter back to
unit.
6. The unit is now ready to power up.
Note
Please clean regularly to avoid damaging the
internal components of the machine.
WARNING
The procedure above should only be attempted by
competent persons.
Ensure the AC power cord is not connected to
power before operation.