User Manual

ManualsBrandsGW Instek ManualsAC Power SourcesAC/DC Power Source, 1kVA, Programmable

COMMUNICATION INTERFACE

171

Exit

5. Press Exit[F4] to exit from the

GPIB settings.

GPIB Constraints

 Maximum 15 devices altogether, 20m

cable length, 2m between each device

 Unique address assigned to each device

 At least 2/3 of the devices turned On

 No loop or parallel connection

Note

The optional 1 interface does Not include GPIB

data cable. Please purchase the additional GTL-258

which will meet your need for GPIB connection.

GPIB Function Check

Functionality

Check

Please use the National Instruments

Measurement & Automation Controller software

to confirm GPIB/LAN functionality.

See the National Instrument website,

http://www.ni.com for details.

Note

 For further details, please see the

programming manual, available on the GW

Instek web site @ www.gwinstek.com

 Operating System: Windows XP, 7, 8, 10

Operation

1. Start the NI Measurement and

Automation Explorer (MAX)

program. Using Windows, press: