User Manual

ManualsBrandsGW Instek ManualsAC Power SourcesAC/DC Power Source, 1kVA, Programmable

COMMUNICATION INTERFACE

161

DHCP

ON, OFF

6. If DHCP was set to OFF, configure the

remaining LAN parameters.

IP Address

Subnet Mask

Gateway

DNS Server

Socket Port

Note

Socket Port is fixed to 2268.

LAN configuration - 1

LAN configuration - 2

Exit

7. Press Exit[F4] to exit from the

LAN settings.

USB Remote Interface

USB

Configuration

PC side

connector

Type A, host

ASR-2000 side

connector

Rear panel Type B, slave

Speed

1.1/2.0 (full speed/auto speed)

USB Class

CDC (communications device

class)

Steps

1. Connect the Type A-Type B USB

cable from the PC to the rear

panel USB B port.