User Manual

ASR-2000 Series User Manual
134
Sequence Settings
Entering the
Sequence Menu
1. Press Test key.
Test
Alternatively, it is available to
navigate, with scroll wheel, to the
TEST SEQ… option followed by
pressing the Enter key to enter the
SEQUENCE menu.
It is available for AC+DC-INT, AC-INT and
DC-INT modes only.
2. Press Seq/Sim[F1] key to toggle to the
SEQUENCE Mode.
Sequence Mode
F1 soft-key
It is available for AC+DC-INT mode only.
Steps
3. Use the scroll wheel to go to the Step setting
and press Enter.
4. Use the scroll wheel to select the step number.
0 is always the starting step for the sequence.
Step
0 ~ 999
5. Go to the Time setting and set the duration of
the step.
Time
0.0001 ~ 999.9999s