User Manual

ASR-2000 Series User Manual
130
Step
Assigns the step number.
Time
Sets the step duration time. This
step time is exclusive of any
transition time needed to match
start phases and stop phase. See
the diagram on page 133 for details.
ACV
Sets the AC voltage level. There are
3 secondary voltage settings that
determine how the voltage is
output.
CT: Sets the voltage level of the step
immediately to ACV values.
KP: Sets the voltage level to “keep”
the voltage of the previous step.
SP: Linearly increases or decreases
the values from the end of the
previous step to the end of the
current step.
Note: it is available for AC+DC-INT
and AC-INT modes only.
DCV
Sets the DC voltage level. There are
3 secondary voltage settings that
determine how the voltage is
output.
CT: Sets the voltage level of the step
immediately to DCV values.
KP: Sets the voltage level to “keep”
the voltage of the previous step.
SP: Linearly increases or decreases
the values from the end of the
previous step to the end of the
current step.
Note: it is available for AC+DC-INT
and DC-INT modes only.