User Manual

MISCELLANEOUS
127
Example
THD Format setting
External Control I/O
User can enable or disable the External Control I/O input. When
External Control I/O input is set as disabled, the ASR-2000 series
status will remain output.
Steps
1. Press the Menu key. The Menu
setting will appear on the display.
2. Use the scroll wheel to go to item 2, MISC
Configuration and press Enter.
3. Go to the External Control setting using the
scroll wheel and press Enter. Enable or disable
External Control I/O and press Enter again to
confirm selection.
ON
Signal will be input from the pin 11
to the pin 17 of External Control
I/O, and ASR-2000 series is able to
receive external input signal and
execute control action.
OFF
Signal will be input from the pin 11
to the pin 17 of External Control
I/O, and ASR-2000 series is Not
able to receive external input signal.