User Manual

MISCELLANEOUS
125
Exit
4. Press Exit[F4] to exit from the
MISC Configuration settings.
Example
Output Relay setting
THD Format
Choose one of the THD (Total Harmonic Distortion) equations. The
equations of 2 varied modes (IEC by default) of Harmonic Format
below are for, specifically, by the time the upper limit of measured
harmonic order is 40.
Steps
1. Press the Menu key. The Menu
setting will appear on the display.
2. Use the scroll wheel to go to item 2, MISC
Configuration and press Enter.
3. Go to the THD Format setting using the scroll
wheel and press Enter. Choose the harmonic
mode and press Enter again to confirm.