User Manual

EXTERNAL CONTROL
105
EXTERNAL CONTROL
The rear panel has 3 signal output connectors.
These connectors are used for external control
from the menu of this product by using the
external signal that includes amplified external
voltage, amplified external signal as well as
synchronization frequency.
Note that prior to operation, it is required to
implement insulation process for external circuit.
For example, while connecting to I/O signals of
ASR-2000, be sure to have double insulation
process for live parts in advance.
Furthermore the state output is always on. The
following chapter will give a brief overview each
of these connectors.
Using External Control I/O ................................... 106
Using External Signal Input Function.................... 107
EXT GAIN - AC+DC-EXT and AC-EXT mode .................. 108
EXT ADD - AC+DC-ADD and AC-ADD mode ................. 109
EXT Sync - AC+DC-Sync and AC-Sync mode ....................... 109
Compiling Arbitrary Waveform Input .................... 110