User Manual

ManualsBrandsGW Instek ManualsAC Power SourcesAC/DC Power Source, 1kVA, Programmable

OPERATION

101

Load Preset Settings to Local Memory

Any of the 10 preset settings can be recalled from internal memory.

Steps

1. Press Preset followed by

clicking on the F1 ~ F4

soft-keys individually to

load the corresponding

memory number.

+

Presets

M0 ~ M3

2. Press the Preset key again to exit from the

preset mode.

Example

For example, pressing Preset + F1 will recall the

saved settings from memory slot 1 (recalled

from M0).

Note

 There are overall 10 groups of memory

number for preset setting (M0 ~ M9). Only

M0 ~ M3 are available in soft-keys, whereas

the rest groups M4 ~ M9 can be recalled in

the Save/Recall Files utility under Menu

system. Refer to page 102 for more details.

 The preset key will be lit green when

active. A beep will be heard (Buzzer is set

to ON) and a message will displayed when

the settings are recalled.