User Manual User guide

APS-1102A User Manual

APS-1102A

4-16

4.2.2 Set phase at output on

To set the phase at output on, select “Phase at output on” in the SET menu and set a numerical

value.

Before changing the phase at output on, set output off.

 Operation steps

1. Press the or key to move the cursor to the icon.

ENTERCANCEL

Cursor

2. Press the

ENTER

key to display the modification box.

ENTERCANCEL

Modification box

3. Press the and keys to move the cursor to the digit to be changed, turn the MODIFY dial

and set a numerical value. The set value will be reflected in output immediately.

4. Press the

CANCEL

ENTER

key to close the modification box.

Increase

Decrease