User Manual User guide

2 PREPARATIONS BEFORE USE
APS-1102A
2-5
 Do not install the APS-1102A in the following locations:
 Location with flammable gas
 An explosion may occur. Never install and use this product in such a location.
 Outdoors, or location exposed to direct sunlight or near a fire or heat source
 The full performance of this product may not be obtained, or failure may occur.
 Location with corrosive gas, moisture, or high humidity
 This product may become corroded or fail.
 Location near an electromagnetic field source, high-voltage device, or power line
 This product may malfunction.
 Location exposed to excessive vibration
 This product may malfunction or fail.
 Location with excessive dust
 In particular, electrically conductive dust may cause failure of this product.