User Manual User guide

APS-1102A User Manual
APS-1102A
6-6
2. Press the or key to move the cursor to “RS232”.
ENTERCANCEL
3. Press the
ENTER
key to display the “RS232” screen.
ENTERCANCEL
4. Set each item.
ENTERCANCEL
------- Notes --------------------------------------------------------------------------------------------------------
 Avoid use in a place that has power fluctuation or under electrically noisy environment.
 Turn off this product and the computer before connecting or disconnecting the cable.
 Binary transmission is not supported.
 To transfer arbitrary waveforms data, using USB interface.
-------------------------------------------------------------------------------------------------------------------------