User Manual User guide

APS-1102A User Manual
APS-1102A
6-4
 USB ID
Used for a system connected with APS-1102A through USB, to enable the application identify each
source. The USB ID is represented in the following format.
USB0::[Vendor number]::[Product number]::[Serial number]::INSTR
Vendor number: Fixed to 8580 (0x2184)
Product number: Fixed to 57 (0x0039)
Serial number: A unique number (serial number) has been set for each product.
6.1.2 RS232
For the interface specifications, See “9.12 External Interface.”
 Operation steps <1>
Enable RS232 by following steps below.
1. Open SYSTEM MENU to open “REMOTE”.
ENTERCANCEL
2. Press the or key to move the cursor to “INTERFACE”.
ENTERCANCEL