User Manual User guide

5 MENUS
APS-1102A
5-49
5.6.8 Reset function
This function resets all basic settings to their initial (factory) settings.
The APS-1102A cannot be reset when output is on. Always turn output off before resetting the
APS-1102A.
See “3.2 Display and Initial Settings at Power-on”, for description of the settings after a
reset.
 Operation steps
1. Press the or key to move the cursor to “RESET…”.
ENTERCANCEL
Cursor
2. Press the
ENTER
key to display the EXEC box.
ENTERCANCEL
EXEC box
3. After selecting “EXEC”, press the
ENTER
key to reset the APS-1102A.
5.6.9 System information
Select “INFORMATION” in the “SYSTEM” screen to view system information such as the firmware
version number.
See “8.4 Checking the Version Number”, for description of the operation steps for viewing
this version number.