User Manual User guide

APS-1102A User Manual
APS-1102A
5-48
5.6.7 External control input enable/disable setting
External control input can be set as enabled or disabled. However, the APS-1102A status will be output
even when external control input is set as disabled.
See “4.5 Control Using External Control I/O Connector”, for details of external control
input.
 Operation steps
1. Press the or key to move the cursor to “EXT CONTROL”.
ENTERCANCEL
Cursor
2. Press the
ENTER
key to display the selection box.
ENTERCANCEL
Selection box
3. Press the or key to move the cursor to “ENABLE” or “DISABLE”.
ENTERCANCEL
4. Press the
ENTER
key to complete the setting. Press the
CANCEL
key to cancel the setting.