User Manual User guide

5 MENUS
APS-1102A
5-47
5.6.6 Output on/off setting at power-on
The APS-1102A can be set to automatically turn output on at power-on.
However, when restarting after a system lock, the APS-1102A will start with output off regardless of this
setting.
 Operation steps
1. Press the or key to move the cursor to “INIT OUT”.
ENTERCANCEL
Cursor
2. Press the
ENTER
key to display the selection box.
ENTERCANCEL
Selection box
3. Press the or key to move the cursor to “ON” (when off) or to “OFF” (when on).
ENTERCANCEL
4. Press the
ENTER
key to complete the setting. Press the
CANCEL
key to cancel the setting.