User Manual User guide

5 MENUS
APS-1102A
5-43
5.6.2 Beep sound
When the beep sound is on, a beep sounds when an incorrect operation is made, a key is pressed, or a
modify operation is made. When a protection function-related error occurs, an alarm sound will be output
regardless of the beep sound setting.
 Operation steps
1. Press the or key to move the cursor to “BEEP”.
ENTERCANCEL
Cursor
2. Press the
ENTER
key to display the selection box.
ENTERCANCEL
Selection box
3. Press the or key to move the cursor to the other beep setting (i.e., to OFF when on or
to ON when off).
ENTERCANCEL
4. Press the
ENTER
key to complete the setting. Press the
CANCEL
key to cancel the setting.