User Manual User guide

APS-1102A User Manual
APS-1102A
5-24
5.4.1 Output voltage measurement
When “MEASURE” has been selected in the MISC menu, RMS value (RMS), average DC (AVG), or
peak value (PEAK) is displayed.
The initial setting (factory setting) is to display the RMS value (RMS).
See “3.4.9 Using measurement functions”.
a) RMS value RMS value of AC+DC
 Full scale: 250.0 Vrms: 100 V range
500.0 Vrms: 200 V range
 Display resolution: 0.1 Vrms
 Measurement accuracy: at 45 Hz to 65 Hz
(0.5% of rdg + 0.3 Vrms): 100 V range
(0.5% of rdg + 0.6 Vrms): 200 V range
at DC, 40 Hz to 550 Hz
(0.7% of rdg + 0.9 Vrms): 100 V range
(0.7% of rdg + 1.8 Vrms): 200 V range
(at 23 5°C)
b) Average value Average value of AC+DC (measurement of DC)
 Full scale: 250.0 V: 100 V range
500.0 V: 200 V range
 Display resolution: 0.1 V
 Measurement accuracy: (|0.5% of rdg| + 0.4 V): 100 V range
(|0.5% of rdg| + 0.8 V): 200 V range
(at 23 5°C)
c) Peak value Minimum voltage and maximum voltage are displayed
separately
 Full scale: 250 Vpk: 100 V range
500 Vpk: 200 V range
 Display resolution: 1 Vpk
 Measurement accuracy: (|1.5% of rdg| + 3 Vpk): 100 V range
(|1.5% of rdg| + 6 Vpk): 200 V range
(reference value, at 23 5°C, sine wave of which frequency is 45 Hz to 65
Hz)