User Manual User guide

APS-1102A User Manual
APS-1102A
5-20
5.3.6 Waveform settings
When AC-INT, AC-ADD, AC-SYNC, AC+DC-INT, AC+DC-ADD, or AC+DC-SYNC mode is selected,
select sine wave, square wave, or arbitrary waveform (16 types) as the waveform to be output.
Arbitrary waveforms data is transferred to APS-1102A via USB interface.
 Operation steps
To select a waveform, select in the SET menu.
See “3.4.4 Setting waveform”, for description of waveform settings.
See the control software user’s manual, for description of arbitrary waveform transfers.