User Manual User guide

APS-1102A User Manual
APS-1102A
4-60
4. Press the or key to move the cursor to the output voltage range to be set, then press the
ENTER
key.
 This sets the selected output voltage range.
ENTERCANCEL
5. Press the or key to move the cursor to the icon, then press the
ENTER
key.
 The modification box is displayed.
ENTERCANCEL
6. Press the and keys to move the cursor to the column to be changed, turn the MODIFY dial
and set a numerical value.
 The set value is reflected immediately in the output.
Increase
Decrease
7. After entering all of the values, press the
CANCEL
or
ENTER
key to close the modification box.