User Manual User guide

4 ADVANCED OPERATION EXAMPLE
APS-1102A
4-53
4. Press the
ENTER
key to select the mode to be set.
ENTERCANCEL
5. Press the or key to move the cursor to the icon, then press the
ENTER
key to
display the selection box.
ENTERCANCEL
Selection box
6. Press the or key to move the cursor to “EXT”, then press the
ENTER
key.
 This sets the external sync signal source to external sync signal “EXT”.
ENTERCANCEL
---------- Notes -----------------------------------------------------------------------------------------------------
 The frequency range for external synchronization is 40 Hz to 50 0 Hz. Only use settings
within this range.
-------------------------------------------------------------------------------------------------------------------------