User Manual User guide

APS-1102A User Manual

APS-1102A

4-46

8. Press the key to select “CONTROL”, then press the

ENTER

key to display the selection box.

ENTERCANCEL

9. Select “START”, then press the

ENTER

key to start the sequence.

b) When using keys on the control panel

 Operation steps

1. Press the TOP MENU key to return to the top menu, check the settings in the menu, then press the

OUTPUT

key on the control panel.

 This set output on, at which time the output on/off LED goes on.

OUTPUT

Output off

Output on

2. Press the START key (shortcut key) to start sequence.

Selection box

Output on/off LED is on