Manualshelf

User Manual User guide

ManualsBrandsGW Instek ManualsEquipmentAPS-1102A
111112113114115116117118119120
APS-1102A User Manual
APS-1102A
4-44
4.4.7 Execution of sequence operations
Once sequence programming has been completed, start the sequence.
The execution steps for the sequence operations are described below.
a) When using the MISC menu
Operation steps
1. Press the TOP MENU key (shortcut key) to return to the top menu. In the top menu, “SET” is
shown in the upper left corner of the menu window.
The sequence is executed only when output is on. Make sure output is on beforehand.
2. Press the or key to move the cursor to the icon.
ENTERCANCEL
3. Press the
ENTER
key to display the MISC menu
Press the or key to move the cursor to “OUTPUT”.
ENTERCANCEL
Cursor