User Manual User guide

APS-1102A User Manual
APS-1102A
4-30
3. Press the
ENTER
key to display the SEQUENCE screen.
ENTERCANCEL
4. Press the or key to select the operation to be performed.
 To control sequence operations: select “CONTROL…”.
( See “4.4.4 Control of sequence operations”.)
Note This cannot be selected when output is off.
 To program a sequence: Select “PROGRAM”.
( See “4.4.3 Programming sequences”.)
 To control sequence memory: Select “MEMORY…”.
( See “4.4.5 Clear sequence memory”.)
ENTERCANCEL
5. Press the
ENTER
key to display the desired screen .
ENTERCANCEL