User Manual User guide

4 ADVANCED OPERATION EXAMPLE
APS-1102A
4-29
4.4.2 Sequence settings
Sequence settings are made as described below.
Input per step via control panel
Programmed from PC, with remote interface transfer to APS-1102A
Sequence data is edited and transferred using accompanying control software
See “4.4.3 Programming sequences” below, for further description of the program messages
for sequence operations.
See the control software users manual, for description of the control software.
The operations on the control panel are described below.
Operation steps
To display the sequence menu, select “SEQUENCE in the MISC menu .
1. Press the or key to move the cursor to the icon.
ENTERCANCEL
Cursor
2. Press the
ENTER
key to display the MISC menu.
Press the or key to move the cursor to “SEQUENCE”.
ENTERCANCEL