User Manual Manual

4.2 Measurement of Inrush Current
APS-1102 Programmable AC/DC Power Source 4-15
4.2.2 Set phase at output on
To set the phase at output on, select “Phase at output on” in the SET menu and set a numerical
value.
Before changing the phase at output on, set output off.
 Operation steps
1. Press the
or key to move the cursor to the icon.
ENTERCANCEL
Cursor
2. Press the
ENTER
key to display the modification box.
ENTERCANCEL
Modification box
3. Press the
and keys to move the cursor to the digit to be changed, turn the MODIFY dial
and set a numerical value. The set value will be reflected in output immediately.
Increase
Decrease
4. Press the
CANCEL
or
ENTER
key to close the modification box.