User Manual Manual

3.4 Main Operation Example
APS-1102 Programmable AC/DC Power Source 3-20
2. Press the
ENTER
key to display the selection box.
ENTERCANCEL
Selection box
3. Press the
or key to move the cursor to the output voltage range to be selected.
ENTERCANCEL
4. Press the
ENTER
key. Then the
icon appears in the status window.
ENTERCANCEL
Status window
⇒ The
icon goes out in a few seconds, then the display will change to the selected output
voltage range.
 Changing the output voltage range takes about eight seconds.