User Manual Manual

5.5 MISC Menu
APS-1102 Programmable AC/DC Power Source 5-32
5.5.3 Remote (REMOTE)
The remote control connected via a USB interface can be used to switch to local mode for operation via
the panel screen.
When in remote control mode, the “RMT” icon is displayed.
See “6 USB INTERFACE”.
 Operation steps
1. Select “LOCAL…”, then press the
ENTER
key.
 The EXEC box is displayed.
ENTERCANCEL
EXEC box
Displayed during
remote mode
2. Make sure “EXEC” has been selected, then press the
ENTER
key.
 This sets local mode.
ENTERCANCEL
Nothing is shown here
during local mode.
5.5.4 System (SYSTEM)
The APS-1102 system settings are displayed in the “SYSTEM” screen.
See “5.6 System Menu”, for detailed description of the system menu.