User manual

REMOTE INTERFACE
271
SOURce[1]:ARB:BUILt:DC
Source Specific
Command
Description
Creates an exponential fall wave with a specified
start address, length and scale.
Syntax SOURce[1]:ARB:BUILt:DC
[<STARt>[,<LENGth>[,<SCALe>]]]
Parameter <STARt> Start address*: 0~1048,576
<LENGth> Length*: 0 ~ 1048,576
<SCALe> Scale: ±32767
* Start + Length ≤ 1,048,576
Example SOUR1:ARB:BUIL:DC 1000, 1000, 100
Creates an exponential fall wave 1000 points in
length with a scale of 100 and a start address of
1000.
SOURce[1]:ARB:NCYCles
Source Specific
Command
Description
The arbitrary waveform output can be repeated for
a designated number of cycles.
Syntax SOURce[1]:ARB:NCYCles {< #cycles>
|INFinity|MINimum |MAXimum}
Parameter <# cycles> 1~1,048,575 cycles
INFinity Sets the number of cycles
to continuous.
MINimum Sets the number of cycles
to the minimum allowed.
MAXimum Sets the number of cycles
to the maximum allowed.
Example SOUR1:ARB:NCYCl INF
Sets the number of ARB waveform output cycles to
continuous (infinite).
Query Syntax SOURce[1]:ARB:NCYCles? [MINimum|MAXimum]