User manual

REMOTE INTERFACE
265
Note
A waveform/waveform segment cannot be
deleted when output.
Syntax SOURce[1]:ARB:EDIT:DELete [<STARt>[,<LENGth>]]
Parameter <STARt> Start address: 0~1048,576
<LENGth> 0 ~ 1048,576
Example SOURce1:ARB:EDIT:DEL 1000, 256
Deletes a section of 256 data points from the
waveform starting at address 1000.
SOURce[1]:ARB:EDIT:DELete:ALL
Source Specific
Command
Description
Deletes all user-defined waveforms from non-
volatile memory and the current waveform in
volatile memory.
Note
A waveform cannot be deleted when output.
Syntax SOURce[1]:ARB:EDIT:DELete:ALL
Example SOUR1:ARB:EDIT:DEL:ALL
Deletes all user waveforms from memory.
SOURce[1]:ARB:EDIT:POINt
Source Specific
Command
Description
Edit a point on the arbitrary waveform.
Note
A waveform/waveform segment cannot be
deleted when output.
Syntax SOURce[1]:ARB:EDIT:POINt [<address> [, <data>]]
Parameter <address> Address of data point:
0~1,048,576
<data> Value data: ± 32,767
Example SOUR1:ARB:EDIT:POIN 1000, 32767
Creates a point on the arbitrary waveform at
address 1000 with the highest amplitude.