User manual

AFG-3000 Series User Manual
234
Example SOUR1:FSK:STAT ON
Enables FSK modulation
Query Syntax SOURce[1]:FSKey:STATe?
Return Parameter
0 Disabled (OFF)
1 Enabled (ON)
Example SOUR1:FSK:STAT?
ON
FSK modulation is currently enabled.
SOURce[1]:FSKey:SOURce
Source Specific
Command
Description
Sets or queries the FSK source as internal or
external. Internal is the default source.
Note
If an external FSK source is selected, FSK rate is
controlled by the Trigger INPUT terminal on the
rear panel.
Syntax SOURce[1]:FSKey:SOURce {INTernal|EXTernal}
Example SOUR1:FSK:SOUR EXT
Sets the FSK source to external.
Query Syntax SOURce[1]:FSKey:SOURce?
Return Parameter
INT Internal
EXT External
Example SOUR1:FSK:SOUR?
INT
The FSK source is set to internal.
SOURce[1]:FSKey:FREQuency
Source Specific
Command
Description
Sets the FSK hop frequency. The default hop
frequency is set to 100Hz.