User manual

SECONDARY SYSTEM FUNCTION
SETTINGS
131
Setting the output impedance
Background
The AFG-3000 has selectable output impedances:
50Ω or high impedance. The default output
impedance is 50Ω. The output impedances are to
be used as a reference only. If the actual load
impedance is different to that specified, then the
actual amplitude and offset will vary accordingly.
Panel Operation
1. Press the UTIL key.
2. Press F4 (Load).
3. Load will become highlighted in red.
4. Select F1 (50 OHM) or F2
(High Z) to select the output
impedance.
~