User manual

AFG-200 SERIES USER MANUAL
The offset of channel 2 from channel 1 is 2kHz.
SOURce[1|2]:FREQuency:COUPle:RATio
Instrument
Command
Description
Sets the frequency coupling ratio when frequency
coupling is set to ratio mode.
Syntax SOURce[1|2]:FREQuency:COUPle:RATio {ratio}
Example SOURce1:FREQuency:COUPle:RATio 2
Set the CH2 to CH1 frequency ratio to 2.
Query Syntax SOURce[1|2]:FREQuency:COUPle:RATio?
Example SOURce1:FREQuency:COUPle:RATio?
+2.0000E+00
Returns the CH2 to CH1 frequency ratio as 2.
SOURce[1|2]:AMPlitude:COUPle:STATe
Instrument
Command
Description
Enables or disables the amplitude coupling.
Syntax
SOURce[1|2]:AMPlitude:COUPle:STATe
{ON|Off}
Example SOURce1:AMPlitude:COUPle:STATe on
Description
Turns amplitude coupling on.
Query Syntax SOURce[1|2]:AMPlitude:COUPle:STATe?
1
ON
Return Parameter
0
Off
Example SOURce1:AMPlitude:COUPle:STATe?
1
Amplitude coupling has been enabled.
SOURce[1|2]:TRACk
Instrument
Command
97