User manual

AFG-200 SERIES USER MANUAL

Parameter <address> Address of data point:

0~4095

<data> Value data: ± 511

Example SOUR1:ARB:EDIT:POIN 1000, 511

Creates a point on the arbitrary waveform at

address 1000 with the highest amplitude.

SOURce[1|2]:ARB:EDIT:LINE

Source Specific

Command

Description

Edit a line on the arbitrary waveform. The line is

created with a starting address and data point and

a finishing address and data point.

Note

A waveform/waveform segment cannot be

deleted when output.

Syntax SOURce[1|2]:ARB:EDIT:LINE

[<address1>[,<data>[,<address2>[,<data2>]]]]

Parameter <addrress1> Address of data point1:

0~4095

<data1> Value data2: ± 511

<address2> Address of data point2:

0~4095

<data2> Value data2: ± 511

Example SOUR1:ARB:EDIT:LINE 40, 50, 100, 50

Creates a line on the arbitrary waveform at 40,50 to

100,50.

SOURce[1|2]:ARB:EDIT:PROTect

Source Specific

Command

Description

Protects a segment of the arbitrary waveform from

deletion or editing.

Syntax SOURce[1|2]:ARB:EDIT:PROTect

[<STARt>[,<LENGth>]

Parameter <STARt> Start address: 0~4095