User manual

AFG-200 SERIES USER MANUAL
SOURce[1|2]:ARB:EDIT:DELete
Source Specific
Command
Description
Deletes a segment of a waveform from memory.
The segment is defined by a starting address and
length.
Note
A waveform/waveform segment cannot be
deleted when output.
Syntax SOURce[1|2]:ARB:EDIT:DELete [<STARt>[,<LENGth>]]
Parameter <STARt> Start address: 0~4095
<LENGth> 1 ~ 4096
Example SOURce1:ARB:EDIT:DEL 1000, 256
Deletes a section of 256 data points from the
waveform starting at address 1000.
SOURce[1|2]:ARB:EDIT:DELete:ALL
Source Specific
Command
Description
Deletes all user-defined waveforms from
non-volatile memory and the current waveform in
volatile memory.
Note
A waveform cannot be deleted when output.
Syntax SOURce[1|2]:ARB:EDIT:DELete:ALL
Example SOUR1:ARB:EDIT:DEL:ALL
Deletes all user waveforms from memory.
SOURce[1|2]:ARB:EDIT:POINt
Source Specific
Command
Description
Edit a point on the arbitrary waveform.
Note
A waveform/waveform segment cannot be
deleted when output.
Syntax SOURce[1|2]:ARB:EDIT:POINt [<address> [, <data>]]
92