User manual

AFG-200 SERIES USER MANUAL
Sets the trigger output signal slope to positive
(rising edge).
Query Syntax SOURce[1|2]:BURSt:OUTPut:TRIGger:SLOPe?
Return Parameter
POS Rising edge.
NEG Falling edge.
Example SOUR1:BURS:OUTP:TRIG:SLOP?
POS
The trigger output signal slope to positive.
SOURce[1|2]:BURSt:OUTPut[1|2]:TRIGger
Source Specific
Command
Description Sets or queries the trigger output signal on or off.
By default the signal is disabled. When enabled, a
TTL compatible square wave is output.
Syntax
SOURce[1|2]:BURSt:OUTPut[1|2]:TRIGger {OFF|ON}
Parameter
OFF
Turns the output off.
ON
Turns the output on.
Example
SOURce[1|2]:BURSt:OUTP1:TRIG ON
Turns the output on.
Query Syntax
SOURce[1|2]:BURSt:OUTPut[1|2]:TRIGger?
Return
Parameter
0
Disabled
1
Enabled
Query Example
SOURce[1|2]:BURSt:OUTP1:TRIG?
1
The trigger output is enabled.
88