User manual

AFG-200 SERIES USER MANUAL
Syntax SOURce[1|2]:BURSt:GATE:POLarity
{NORMal|INVertes}
Parameter NORMal Logically high
INVertes Logically low
Example SOUR1:BURS:GATE:POL INV
Sets the state to logically low (inverted).
Query Syntax SOURce[1|2]:BURSt:GATE:POLarity?
Return Parameter
NORM Normal(High) logical level
INV Inverted (low) logical level
Example SOUR1:BURS:GATE:POL?
INV
The true state is inverted(logically low).
SOURce[1|2]:BURSt:OUTPut:TRIGger:SLOPe
Source Specific
Command
Description
Sets or queries the trigger edge of the trigger
output signal. The signal is output from the trigger
out terminal on the rear panel. The default trigger
output slope is positive.
Immediate 50% duty cycle square wave is
output at the start of each burst.
External Trigger output disabled.
Gated mode Trigger output disabled.
Manual A >1 ms pulse is output at the
start of each burst.
Syntax SOURce[1|2]:BURSt:OUTPut:TRIGger:SLOPe
{POSitive|NEGative}
Parameter POSitive Rising edge.
NEGative Falling edge.
Example SOUR1:BURS:OUTP:TRIG:SLOP POS
87