User manual

AFG-200 SERIES USER MANUAL
Return Parameter
<NRf> Delay in seconds
Example SOUR1:BURS:TRIG:DEL ?
+1.0000E+01
The trigger delay is 10 seconds.
SOURce[1|2]:BURSt:TRIGger:SLOPe
Source Specific
Command
Description
Sets or queries the trigger edge for externally
triggered bursts from the Trigger INPUT terminal
on the rear panel. By default the trigger is rising
edge (Positive).
Syntax SOURce[1|2]:BURSt:TRIGger:SLOPe
{POSitive|NEGative}
Parameter POSitive rising edge
NEGative falling edge
Example SOUR1:BURS:TRIG:SLOP NEG
Sets the trigger slope to negative.
Query Syntax SOURce[1|2]:BURSt:TRIGger:SLOPe?
Return Parameter
POS rising edge
NEG falling edge
Example SOUR1:BURS:TRIG:SLOP ?
NEG
The trigger slope is negative.
SOURce[1|2]:BURSt:GATE:POLarity
Source Specific
Command
Description
In gated mode, the function generator will output
a waveform continuously while the external
trigger receives logically true signal from the
Trigger INPUT terminal. Normally a signal is
logically true when it is high. The logical level can
be inverted so that a low signal is considered true.
86