User manual

AFG-200 SERIES USER MANUAL
SOURce[1|2]:BURSt:STATe
Source Specific
Command
Description
Turns burst mode on or off. By default burst
mode is turned off.
Note
When burst mode is turned on, sweep and any
modulation modes are disabled.
Syntax SOURce[1|2]:BURSt:STATe {OFF|ON}
Example SOUR1:BURS:STAT ON
Turns burst mode on.
Query Syntax SOURce[1|2]:BURSt:STATe?
Return Parameter
0 Disabled
1 Enabled
Example SOUR1:BURS:STAT?
0
Burst mode is off.
SOURce[1|2]:BURSt:MODE
Source Specific
Command
Description
Sets or queries the burst mode is triggered. The
default burst mode is triggered.
Syntax SOURce[1|2]:BURSt:MODE TRIGgered
Example SOUR1:BURS:MODE TRIG
Sets the burst mode to triggered.
Query Syntax SOURce[1|2]:BURSt:MODE?
Return Parameter
TRIG Triggered mode
Example SOUR1:BURS:MODE?
TRIG
The current burst mode is triggered.
81