User manual

AFG-200 SERIES USER MANUAL
Parameter <frequency>
1μHz~ 25MHz
1μHz~ 15MHz(Square)
1μHz~ 1MHz (Ramp)
Example SOUR1:FREQ:STOP +2.0000E+03
Sets the stop frequency to 2kHz.
Query Syntax SOURce[1|2]:FREQuency:STOP? [MINimum|
MAXimum]
Return Parameter
<NR3> Returns the stop frequency
in Hz.
Example SOUR1:FREQ:STOP? MAX
+8.0000E+00
Returns the maximum stop frequency allowed.
SOURce[1|2]:FREQuency:CENTer
Source Specific
Command
Description
Sets and queries the center frequenc
y
of the sweep.
550 Hz is the default center frequency.
Note
The maximum center frequency depends on the
sweep span and maximum frequency:
max center freq = max freq – span/2
Syntax SOURce[1|2]:FREQuency:CENTer
{<frequency>|MINimum|MAXimum}
Parameter <frequency> 450Hz~ 25MHz
450Hz~ 15MHz(Square)
450Hz~ 1MHz (Ramp)
Example SOUR1:FREQ:CENT +2.0000E+03
Sets the center frequency to 2kHz.
Query Syntax SOURce[1|2]:FREQuency:CENTer? [MINimum|
MAXimum]
Return Parameter
<NR3> Returns the stop frequency
in Hz.
73