User manual

AFG-200 SERIES USER MANUAL
Note
If an external SUM source is selected, the
amplitude of the modulated waveform is
controlled using the ±5V MOD INPUT terminal on
the rear panel. A positive signal (>0~+5V) will
increase the AMPLitude (up to the set amplitude),
whilst a negative voltage will reduce the
amplitude.
Syntax SOURce[1|2]:SUM:AMPL{< percent>|minimum
|maximum}
Parameter <percent> 0%~100%
Example SOUR1:SUM:AMPLitude +3.0000E+01
Sets the amplitude to 30%.
Query Syntax SOURce[1|2]:SUM:AMPLitude?
Return Parameter
<NR3> Returns the amplitude .
Example SOUR1:SUM:AMPLitude?
+3.0000E+01
The current amplitude is 30%.
69