User manual

AFG-200 SERIES USER MANUAL
Example SOUR1:FSK:STAT ON
Enables FSK modulation
Query Syntax SOURce[1|2]:FSKey:STATe?
Return Parameter
0 Disabled (OFF)
1 Enabled (ON)
Example SOUR1:FSK:STAT?
1
FSK modulation is currently enabled.
SOURce[1|2]:FSKey:FREQuency
Source Specific
Command
Description
Sets the FSK hop frequency. The default hop
frequency is set to 100Hz.
Note
For FSK, the modulating waveform is a square
wave with a duty cycle of 50%.
Syntax SOURce[1|2]:FSKey:FREQuency
{<frequency>|MINimum|MAXimum}
Parameter <frequency>
1 μHz~25MHz(sine)
1 μHz~15MHz(Square、
Pulse)
1 μHz~1MHz(Ramp)
Example SOUR1:FSK:FREQ +1.0000E+02
Sets the FSK hop frequency to to 100Hz.
Query Syntax SOURce[1|2]:FSKey:FREQuency?
[MINimum|MAXimum]
Return Parameter
<NR3> Returns the frequency in
Hz.
Example SOUR1:FSK:FREQ? MAX
+2.5000E+06
Returns the maximum hop frequency allowed.
60