User manual

AFG-200 SERIES USER MANUAL
Default Settings
The command *RST is used to restore the default
panel settings.
*RST
Output Settings
Function Sine Wave
Frequency 1kHz
Amplitude 1.000 Vpp
Offset 0.00V dc
Output units Vpp
Output terminal 50Ω
Power OFF
Sync OFF
Modulation
(AM/FM/FSK/
PM/SUM)
Carrier wave 1kHz sine wave
Modulation wave 100Hz sine wave
AM depth 100%
FM deviation 100Hz
FSK hop frequency 100Hz
FSK frequency 10Hz
PM phase deviation 180˚
SUM amplitude 50%
Modem status Off
Sweep
Start/Stop frequency 100Hz/1kHz
Sweep time 1s
Sweep type Linear
17