User manual

AFG-200 SERIES USER MANUAL
126
Frequency 1uHz~15 MHz(sine)
1uHz~15 MHz(Squa)
1uHz~1 MHz (Ramp)
1uHz~15 MHz(sine)
1uHz~15 MHz(Squa)
1uHz~1 MHz (Ramp)
Burst Count 1 to 65535 cycles or
Infinite
1 to 65535 cycles or
Infinite
Start/Stop Phase -360 to +360 -360 to +360
Internal Period 1ms to 500s 1ms to 500s
Gate Source External Trigger External Trigger
Trigger Source Single or Internal Rate
Single or Internal Rate
Trigger Delay N-Cycle, Infinite 0s to 655350ns 0s to 655350ns
Save/Recall 10 Groups of Setting Memories
Power(only AFG-125P/225P)
Output Voltage (2.5V/3.3V/5V)±5%
Output Current 0.6A
Interface USB (Device)
General Specifications
Power Source DC 5V
Power Consumption 10 W (Max)
Operating
Environment
Temperature to satisfy the specification : 18
~ 28˚C
Operating temperature :
0 ~ 40˚C
Relative Humidity:
＜ 80%, 0 ~ 40˚C
Installation category： CAT II
Operating Altitude 2000 Meters
Storage Temperature
-10~70˚C, Humidity: ≤70%
Dimensions
(WxHxD)
215(W) x 35 (H) x 107(D) mm
Weight Approx. 1kg
Accessories GTL-101× 1(only
AFG-125/125P)
GTL-105A×2（only
AFG-125P）
GTL-101×2(only
AFG-225/225P)
GTL-105A×2(only
AFG-225P)
Quick Start Guide ×1
CD (user manual + software) ×1
Power adapter×1
NOTES:
[1] If only used USB power supply
Amplitude
1mVpp to 2Vpp (into 50Ω)
2mVpp to 4Vpp (open-circuit)
Offset
±1 Vpk ac +dc (into 50Ω)
±2 Vpk ac +dc (Open circuit)