User manual

AFG-200 SERIES USER MANUAL
-221 Settings conflict;Arb doesn’t support phase operation in burst
mode.
Example: When burst mode is enabled,the
parameter of phase can not be change.
-221 Settings conflict;Sweep mode doesn’t support frequency coupling
Example:When modulation mode is
enabled,amplitude coupling mode is automatically
disabled.
-221 Settings conflict;Burst mode doesn’t support frequency coupling.
Example: When burst mode is enabled,amplitude
coupling mode is automatically disabled.
-221 Settings conflict;Modulation mode doesn’t support frequency
coupling.
Example: When modulation is enabled,frequency
coupling is automatically disabled.
-221 Settings conflict;Tracking has forced coupling off.
Example: When tracking mode is enabled,coupling
mode is automatically disabled.
111