User manual

AFG-200 SERIES USER MANUAL
-223 Settings conflict;frequency forced duty cycle change
Example: If the frequency is changed and the current
Duty cannot be supported at the new frequency ,the
Duty will be automatically adjusted.
-221 Settings conflict; frequency reduced for ramp function
Example: When the function is changed to ramp,the
Output frequency is automatically reduced if over
range.
-221 Settings conflict; when amplitude coupling,the other channel can’t
be set to “power”units
Example: The dBm units can not be used when
amplitude coupling, the other channel uses high_z
load
-221 Settings conflict; coupling has forced tracking off.
Example: When coupling mode is enabled,tracking
mode is automatically disabled.
-221 Settings conflict;trace mode doesn’t support ARB
Example: When ARB mode is enabled,tracking mode
is automatically disabled.
109