Datasheet

1
2
1
13
6
7
8
9
23 45
10 11 12 13 14
67
89
10
11
1412
5
LCD Multi-function display
Four meters can display the voltage value at the same
time the Voltage(Vrms, Vpeak, Vmax., Vmin)、Current
(Irms, Ipeak, Imax., Imin.)、Watt, Voltampere(VA)、
Frequency、Crest Factor、Power Factor、Total Harmonic
Distortion of Voltag(VTHD)、Voltage Harmonic(VH)、
Total Harmonic Distortion of Current(ITHD)、Current
Harmonic(IH)
Waveform library keys
Can be quickly set CF √2 / 2 / 2.5 / 3 / 3.5，+/- PF0.6 / 0.7 /
0.8 / 0.9 / 1.0， FREQ Auto / 50Hz/ 60Hz / 400Hz。
Test function keys
Can select Short / OPP / OCP /Non-L / NL-CR /Fuse / Batt
(Battery Discharge) / Trans (UPS transfer time) test functions.
Numeric keypad
Knob setting
Switch
Cursor and button setting
Meter switch button
V / A / W keys can set the display Rms / Peak / Max / Min,Meter
key can select PF / CF / FREQ，switchable display WATT / VA /
VAR keys，THD key choose to display THD
Operate function keys
Mode、Preset ON / OFF、Load ON / OFF、Sense ON / OFF、
Level A / B、Config、Limit、Recall、Store、SEQ、Local、
System operate function keys
AC power input connector
Master-slave control connector
Master : Connect the top or bottom to the next unit
Slave : The top connects to the previous unit and the
bottom connects to the next unit
Vmonitor、Imonitor、Analog input、SYNC input
Input terminal
Vload, Vsense Input terminal
Communication interface (GPIB、RS-232、USB、LAN)
PANEL INSTRUCTIONS
4
3
13
Simply Reliable Good Will Instrument Co., Ltd.
AC & DC Electronic Load