Datasheet

The built-in BATT Test Automation of PEL-3000E provides
battery discharge applications with more flexible discharge
stop time setting as well as rise and fall Slew Rate for discharge
current settings. Under CP, CC or CR mode, the conditions for
OCP test Automation for DUT(Power Supply), Provide users
with high resolution OCP measurement values to verify DUT's
OCP activation point. Provide users with measurement results
so as to help them determine whether DUT's actual OCP
OPP test Automation for DUT(Power Supply), Provide users
with high resolution OPP measurement values to verify DUT's
OPP activation point. Provide users with measurement results
so as to help them determine whether DUT's actual OPP
OCP TEST AUTOMATION
OPP TEST AUTOMATION
E.
F.
G.
stop discharge can be set respectively. For instance, set the
input voltage for stop discharge current, the execution time
for discharge current or total discharge current*time (AH)
to satisfy the verification of battery capability.
activation point meets the regulations. Test the value of OCP
by setting load current increment from start current to stop
current. OCP's activation point can be accurately measured.
activation point meets the regulations. Test the value of OPP by
setting power increment from start power to stop power. OPP's
activation point can be accurately measured.
BATT TEST AUTOMATION
CC Mode CR Mode
CP Mode
BATT Test Automation Editing